Signal splitter

Description
The signal splitter makes it possible to connect one analog sensor to two meters or two analog sensors to one meter, without getting incorrect read-outs due to incorrect resistances.
One analog sensor to two meters
To be used when you want the information from one analogue sensor on two gauges. For example: The analogue sensor in a water tank sending signals to a gauge at the helm and to another on the flybridge
Two analog sensors on one meter
In the situation that there are two tanks on board and want to read the combined level on the same meter.
If a boat is angled while underway, the tank will also be angled and will give a false reading of the tank with only one analog sensor. If you put one analog sensor in the front and one in the back and combine it with this resistance splitter, you get a much more reliable reading from the tank. Works with all analog resistance sensors from Wema: fuel, water, wastewater tank, temperature, and pressure sensor.
• 0 - 465 Ohms
• No calibration required
• 12/24 Volts
• Dimensions 57mm x 51mm x 21mm