-100x100.png)
Max Power ANL fuses are essential protection components designed specifically for electric bow and stern thrusters. They safeguard the electrical system from overloads, short circuits, and high current spikes that may occur during manoeuvring operations. Correct fuse protection ensures reliable thruster performance while protecting batteries, cables, and control electronics.
At Gaelix Marine Service, we supply genuine Max Power ANL fuses and fuse holders compatible with the full range of Max Power tunnel and retractable thrusters. These components are engineered for marine environments and provide safe, compliant installation for professional and recreational vessels.
Why ANL Fuses Are Critical for Thruster Systems
Electric thrusters operate under extremely high current loads during short operational cycles. Unlike standard onboard equipment, bow thrusters can draw hundreds of amperes instantly when activated. Without proper circuit protection, electrical damage may occur to:
-
batteries
-
power cables
-
contactors
-
electronic control boxes
-
motors and drive systems
ANL fuses act as the primary safety barrier by disconnecting power instantly in abnormal conditions.
Designed Specifically for Marine Thruster Applications
Max Power ANL fuses are engineered to match real operating loads of thrusters rather than generic automotive ratings.
Key advantages:
-
High-current marine-rated construction
-
Stable performance under vibration
-
Corrosion-resistant materials
-
Accurate breaking capacity
-
Reliable protection during peak thrust loads
Each fuse value corresponds to specific thruster models and voltage configurations.
Available Fuse Ratings
Typical options include:
| Fuse Rating | Voltage | Compatible Thrusters |
|---|---|---|
| 150A | 12V | CT25 |
| 175A | 12V / 24V | CT35, CT45, CT60, CT80 |
| 225A | 12V / 24V | CT60, CT80, CT125 |
| 325A | 24V | CT125 |
| 400A | 12V / 24V | CT100, VIP150, CT225 |
Correct fuse selection must follow manufacturer specifications.
Not sure which fuse you need? Read our expert guide:
How to Choose the Correct ANL Fuse for a Bow Thruster.
ANL Fuse Holder — Safe Installation Solution
The Max Power ANL fuse holder provides:
-
protected fuse mounting
-
insulated terminals
-
splash-resistant housing
-
safe cable connection
-
easy inspection and replacement
Using the original holder ensures compliance with Max Power installation recommendations.
Installation Best Practices
For optimal safety:
-
install fuse close to battery bank
-
use marine-grade cables
-
follow correct cable sizing
-
ensure secure mounting
-
avoid heat accumulation areas
Proper installation dramatically increases system reliability.
Choosing the Right Fuse (Important)
Fuse size depends on:
-
thruster model
-
system voltage
-
cable length
-
battery configuration
See our complete guide:
Bow Thruster Selection Guide Europe
Why Buy from Gaelix Marine Service
Gaelix Marine Service supplies genuine Max Power components worldwide with technical support for installers, shipyards and yacht owners.
We provide:
-
expert sizing assistance
-
worldwide shipping
-
installation guidance
-
original manufacturer parts