Poly-urethane Clear Gloss Epifanes, 2 components, w/ UV filter, 750gr

Description

“A high gloss, two-component, polyester saturated, aliphatic urethane finish with excellent outdoor durability. Contains a UV filter. To be used on intact existing poly-urethane varnish systems, as a complete varnish system on bare dimensionally stable wood (i.e. marine plywood), as a build-up coat prior to a one-component varnish system, as a protective coat on epoxy resins or as an intermediate coat on epoxy resins when a one-component finish is desired. Suitable for fresh and salt water, for interior and exterior use. Mixing ratio is 2 parts of component A to one part of component B by weight. Each can of base is partially full. Pour the reactor (B) into the can of base (A) and stir thoroughly. Allow to activate for 20-30minutes before use. Polife after mixing 3-4 hours at 20 oC. (70 oF). Temperature should be between 15 oC and 27 oC (60o – 80 oF) during application. For brush/roller or spray application use the appropriate thinner.
Recoatable: After 24 hours at 18 oC. (65 oF)
Coverage: 750grs is sufficient for 9sq.meters (100sq.feet)
Package: 750grs (Comp. A 500grs – comp. B 250grs) – 3000grs”