Victron VE Transfer Switch 5kVA/230V

Description

Victron, Transfer switch VE 5kVA/230V

The TRANSFER SWITCH is designed to take over automatic switching between different power sources: between an generator and the shore, or between an inverter and a generator, or between an inverter and the shore. The TRANSFER SWITCH has two inputs and one output and automatically transfer the availble AC power to output. It can be used

with any Victron Energy inverter, dependence of a capacity.

Operation

The TRANSFER SWITCH is situated between a generator or shore and inverter. If the voltage level or the frequency of the generator or the shore varies (input 1), then the TRANSFER SWITCH switches to the inverter (input 2). Once the generator or the shore supply has remained continuously stable, the TRANSFER SWITCH switches back (input 1)

with delay of approximately 10 seconds. In this way, the appliances are protected against damage from voltage drops. During transfer between one of the power sources (input 1 or input 2), the appliances are not supplied with power for a short time. Because of this, computers, electronics devices etc. connected to this group might loose data. The

TRANSFER SWITCH can be used with any type of inverter but the best results, however, are obtained with an inverter from Victron Enegy.